Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
OSPF and OSPFv3
433
M6100, M5300, and M7100 Series Managed Switches
Configure the OSPFv3 Area Range
To configure the OSPFv3 area range:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Routing > OSPFv3 > Advanced > Area Range Configuration.
8.
Enter the OSPFv3 Area ID.
An area ID is a 32-bit integer in dotted-decimal format that uniquely identifies the area to
which a router interface connects.
9.
Enter the IPv6 Prefix for the address range for the selected area.
10.
From the list in the LSDB Type field, select the type of link advertisement associated with
the specified area and address range.
Options are: Network Summary or NSSA External. The default type is Network
Summary
Summary
.
11.
In the Advertise field, select the Enable or Disable option.
If you select Enable, the address range is advertised outside the area through a network
summary LSA. The default is Enable.
summary LSA. The default is Enable.
12.
Click the Add button.
The new address range is added to the switch.
13.
To remove the specified address range from the area configuration, click the Delete button.