Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

From the Source menu, select from the list of available source routes that were not 

previously configured for redistribution by OSPFv3. The valid values are as follows:

Connected

Static

In the Redistribute Option list, select to Enable or Disable the redistribution for the 

selected source protocol.

Set the Metric value to be used as the metric of redistributed routes. 

This fields displays the metric if the source was preconfigured; otherwise, the tag is 0 and 
can be modified. The valid values are 0 to 16777214.

From the Metric Type list, select the OSPFv3 metric type of redistributed routes.

Set the Tag field in routes redistributed. 

This field displays the tag if the source was preconfigured; otherwise, the tag is 0 and can 
be modified. The valid values are 0 to 4294967295.

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

To refresh the screen with the latest information on the switch, click the Update button.

You can view the NSF OSPFv3 summary. The allowable values for each field are displayed 
next to the field. If any invalid values are entered, an alert message is displayed with the list 
of all the valid values.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100.