Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

The web management interface menu displays.

Select System > Management > Management Interfaces > IPv6 Network Interface 
Neighbor Table

. 

The following table displays IPv6 Network Interface Neighbor Table information.

You can configure network information on the IPv4 service port. The service port is a 
dedicated Ethernet port for out-of-band management of the device. Traffic on this port is 
segregated from operational network traffic on the switch ports and cannot be switched or 
routed to the operational network.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

IPv6 address

The IPv6 address of a neighbor switch visible to the network interface.

MAC address

The MAC address of a neighbor switch.

IsRtr

 if the neighbor machine is a router, false (2) otherwise.

Neighbor State

The state of the neighboring switch: 

. The neighbor is reachable by this switch. 

. Information about the neighbor is scheduled for deletion. 

. No information was received from neighbor during delay 

period. 

. The switch is attempting to probe for this neighbor. 

. Unknown status.

Last Updated

The last sysUpTime that this neighbor was updated.