Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

Use the Search By list to search for multicast entries by Interface or Group IP.

Select Interface from the Search list, enter the interface in unit/slot/port format, for 
example, 1/0/13, then click the Go button. If the entry exists, the entry is displayed as 
the first entry, followed by the remaining entries.

Select Group IP from the Search list, enter the multicast hroup IP, then click the Go 
button. If the entry exists, that entry with the matching hroup IP is displayed as the first 
entry, followed by the remaining entries. An exact match is required.

To refresh the screen with the latest information on the switch, click the Update button.

The following table describes the nonconfigurable data that is displayed. 



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

Interface

The interface on which multicast packets are forwarded.

Group IP

The IP multicast group address for which data is to be displayed.

Compatibility Mode

This parameter shows group compatibility mode (v1, v2, and v3) for this 
group on the specified interface.

Source Filter Mode

The source filter mode (Include, Exclude, or NA) for the specified 
group on this interface. When NA mode is active, the field is blank. 

Source Hosts

This parameter shows source addresses that are members of this 
multicast address.

Expiry Time

This parameter shows expiry time interval against each source address 
that are members of this multicast group. This is the amount of time 
after which the specified source entry is aged out.