Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

To refresh the screen with the latest information on the switch, click the Update button.

The following table describes the nonconfigurable data that is displayed. 

You can statically configure the rendezvous point (RP) address for one or more multicast 
groups.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Select Routing

> IPv6 Multicast > IPv6 PIM > Static RP Configuration. 

BSR Expiry Time (hh:mm:ss) 

Time (in hours, minutes and seconds) in which the learned elected 
bootstrap router (BSR) expires.

IP Address

The IP address of the elected BSR.

Next bootstrap Message 
(hh:mm:ss) 

Time (in hours, minutes, and seconds) in which the next bootstrap 
message is due from this BSR. 

Next Candidate RP Advertisement 
(hh:mm:ss)

Time (in hours, minutes, and seconds) in which the next candidate RP 
advertisement is sent.