Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Manage Device Security
541
M6100, M5300, and M7100 Series Managed Switches
Management Security Settings
You can configure the login password, Remote Authorization Dial-In User Service (RADIUS)
settings, Terminal Access Controller Access Control System (TACACS) settings, and
authentication lists.
settings, Terminal Access Controller Access Control System (TACACS) settings, and
authentication lists.
Configure Users
By default, two user accounts exist:
•
admin, with read/write privileges
•
guest, with read-only privileges
By default, the password is blank for both of these accounts. The names are not
case-sensitive.
case-sensitive.
If you log on to a user account with read/write privileges (as admin), you can assign
passwords and set security parameters for the default accounts and add and delete accounts
(other than admin), up to a maximum of six. Only a user with read/write privileges can modify
data on the web interface screens, and only one account can be created with read/write
privileges.
passwords and set security parameters for the default accounts and add and delete accounts
(other than admin), up to a maximum of six. Only a user with read/write privileges can modify
data on the web interface screens, and only one account can be created with read/write
privileges.
To configure users:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.