Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Manage Device Security
555
M6100, M5300, and M7100 Series Managed Switches
10.
Use Port to specify the authentication port. It must be within the range 0–65535.
11.
Use Key String to specify the authentication and encryption key for TACACS
communications between the device and the TACACS server.
The valid range is 0–128. The key must match the key used on the TACACS server.
12.
Use Connection Timeout to specify the amount of time that passes before the connection
between the device and the TACACS server time-out.
The range is 1–30.
13.
Click the Add button.
The server is added to the switch.
This button is available only to read/write users. These changes are not retained across a
power cycle unless a save is performed.
power cycle unless a save is performed.
14.
To delete the selected server from the configuration, click the Delete button.
Configure a Login Authentication List
A login list specifies the authentication methods to be used to validate switch or port access
for the users associated with the list. The preconfigured users, admin and guest, are
assigned to a preconfigured list named defaultList, which you cannot delete. All newly
created users are also assigned to the defaultList until you specifically assign them to a
different list.
assigned to a preconfigured list named defaultList, which you cannot delete. All newly
created users are also assigned to the defaultList until you specifically assign them to a
different list.
Two default lists are present: DefaultList and networkList.
To configure a login authentication list:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Security > Management Security > Authentication List > Login Authentication
List
List
.