Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Manage Device Security
564
M6100, M5300, and M7100 Series Managed Switches
10.
Select the Java Mode Disable or Enable radio button.
This enables or disables the Java applet, which displays a picture of the switch in the
Device view tab of the System tab. If you run the applet, you can click the picture of the
switch to select configuration screens instead of using the navigation tree on the left side
of the screen. The factory default is Enable.
Device view tab of the System tab. If you run the applet, you can click the picture of the
switch to select configuration screens instead of using the navigation tree on the left side
of the screen. The factory default is Enable.
11.
In the HTTP Session Soft Timeout (Minutes) field, to set the inactivity time-out for HTTP
sessions.
The value must be in the range of 1 to 60 minutes. The default value is 5 minutes. The
currently configured value displays.
currently configured value displays.
12.
In the HTTP Session Hard Timeout (Hours) field, set the hard time-out for HTTP sessions.
This time-out is unaffected by the activity level of the session. The value must be in the
range of 1 to 168 hours. The default value is 24 hours. The currently configured value is
displayed.
range of 1 to 168 hours. The default value is 24 hours. The currently configured value is
displayed.
13.
In the Maximum Number of HTTP Sessions field, set the maximum allowable number of
HTTP sessions.
The value must be in the range of 0 to 16. The default value is 16. The currently
configured value is displayed.
configured value is displayed.
The Authentication List field displays the list that HTTP is using.
HTTPS Configuration
Secure HTTP enables the transmission of HTTP over an encrypted Secure Sockets Layer
(SSL) or Transport Layer Security (TLS) connection. When you manage the switch by using a
web interface, Secure HTTP can help ensure that communication between the management
system and the switch is protected from eavesdroppers and man-in-the-middle attacks.
(SSL) or Transport Layer Security (TLS) connection. When you manage the switch by using a
web interface, Secure HTTP can help ensure that communication between the management
system and the switch is protected from eavesdroppers and man-in-the-middle attacks.
You can to configure the settings for HTTPS communication between the management
station and the switch.
station and the switch.
To configure HTTPS settings:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.