Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure System Information
57
M6100, M5300, and M7100 Series Managed Switches
8.
Select the Clock Source Local or SNTP radio button.
The default is SNTP. The local clock can be set to SNTP only if the following two
conditions are met:
conditions are met:
•
The SNTP server is configured.
•
The SNTP last attempt status is successful.
9.
In the Date field, specify the current date in months, days, and years.
10.
In the Time field, specify the current time in hours, minutes, and seconds.
11.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
To refresh the screen, click the Update button.
Configure the SNTP Global Settings
To configure the SNTP global settings:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select System > Management > Time > Time Configuration > SNTP Global
Configuration
Configuration
.
When you select the SNTP option as the Clock Source, the SNTP Global Configuration
section is displayed below the Time Configuration section of the screen.
section is displayed below the Time Configuration section of the screen.