Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Manage Device Security
578
M6100, M5300, and M7100 Series Managed Switches
The default value is defaultList.
11.
In the Enable Authentication List list, select which authentication list to use when going
into the privileged EXEC mode.
The default value is enableList
The following table describes the nonconfigurable data that is displayed.
Configure Denial of Service Settings
To configure Denial of Service settings:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button. The web management interface menu displays.
7.
Select Security > Access > Denial of Service Configuration.
Table 212. Console Port
Field
Description
Character Size (bits)
The number of bits in a character. This is always 8.
Flow Control
Whether hardware flow control is enabled or disabled. It is always
disabled.
disabled.
Stop Bits
The number of stop bits per character. It is always 1.
Parity
The parity method used on the serial port. It is always None.