Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Manage Device Security
582
M6100, M5300, and M7100 Series Managed Switches
9.
To activate an access profile, select the Activate Profile check box.
10.
To deactivate an access profile, select the Deactivate Profile check box.
11.
To remove an access profile, select the Remove Profile check box.
NETGEAR recommends that you deactivate the access profile before removing it.
The Packets Filtered field displays the number of packets filtered.
12.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
To refresh the screen with the latest information on the switch, click the Update button.
The following table describes the nonconfigurable data that is displayed.
Configure Access Rule Settings
To configure the access rule settings:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
Table 213. Access Profile Configuration Profile Summary
Field
Description
Rule Type
The action performed when the rules are matched.
Service Type
The service type chosen. The policy is restricted by the service type
chosen.
chosen.
Source IP Address
Source IP address of the client originating the management traffic.
Mask
The subnet mask of the IP Address.
Priority
The priority of the rule.