Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Manage Device Security
640
M6100, M5300, and M7100 Series Managed Switches
The following table describes the nonconfigurable data that is displayed.
Configure a Captive Portal Group
To configure a captive portal group:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Security > Control > Captive Portal > CP Group Configuration.
Table 230. Captive Portal Binding Table
Field
Description
Interface
The interface.
CP ID
The ID of the captive portal instance.
Operational Status
Indicates whether the portal is active on the specified interface.
Block Status
Indicates whether the captive portal is temporarily blocked for
authentication.
authentication.
Authenticated Users
Shows the number of authenticated users using the captive portal
instance on this interface.
instance on this interface.