Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Manage Device Security
644
M6100, M5300, and M7100 Series Managed Switches
If you enable this, the SNMP agent sends a trap when a client authenticates with, and
connects to, a captive portal.
connects to, a captive portal.
11.
Select the Client Database Full Disable or Enable radio button..
If you enable this, the SNMP agent sends a trap each time an entry cannot be added to
the client database because it is full.
the client database because it is full.
12.
Select the Client Disconnect Disable or Enable radio button.
If you enable this, the SNMP agent sends a trap when a client disconnects from a captive
portal.
portal.
13.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
View the Captive Portal Client
You can view information about the traffic a client sent or received.
To view the captive portal client:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Security > Control > Captive Portal > CP Client.