Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

You can display information about EAP packets received on a specific port. 



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Select Monitoring > Ports > EAP Statistics.

Use the buttons at the bottom of the screen to perform the following actions:

To clear all the EAP counters for all ports on the switch, select the check box in the 
row heading and click the Clear button. Clicking the button resets all statistics for all 
ports to default values. 

EAPOL Frames Received

The number of valid EAPOL frames of any type that were received by this 
authenticator.

EAPOL Frames Transmitted

The number of EAPOL frames of any type that were transmitted by this 
authenticator.

Time Since Counters Last 
Cleared

The elapsed time in days, hours, minutes, and seconds since the statistics 
for this port were last cleared.