Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Monitor the System
701
M6100, M5300, and M7100 Series Managed Switches
Note:
For VLANs only, the Tx and Rx and None options are applicable.
•
Tx and Rx
. Specify VLAN as the source VLAN.
•
None
. Remove the specified source VLAN.
If the VLAN is configured as the source VLAN, its direction is displayed as a blank
field.
field.
16.
Click the Apply button.
The settings are applied to the system. If the port is configured as a source port, the
Mirroring Port
Mirroring Port
field value is Mirrored.
The Status field indicates the interface status.
Note:
In case of an error dialog having multiple error messages, resolve
them to get the remaining set of errors, if any.
them to get the remaining set of errors, if any.
Configure RSPAN VLAN
You can configure the VLAN to use the remote switched port analyzer (RSPAN) VLAN.
RSPAN allows you to mirror traffic from multiple source ports (or from all ports that are
members of a VLAN) from different network devices and send the mirrored traffic to a
destination port (a probe port connected to a network analyzer) on a remote device. The
mirrored traffic is tagged with the RSPAN VLAN ID and transmitted over trunk ports in the
RSPAN VLAN.
RSPAN allows you to mirror traffic from multiple source ports (or from all ports that are
members of a VLAN) from different network devices and send the mirrored traffic to a
destination port (a probe port connected to a network analyzer) on a remote device. The
mirrored traffic is tagged with the RSPAN VLAN ID and transmitted over trunk ports in the
RSPAN VLAN.
To configure RSPAN VLAN:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Monitoring > Mirroring > RSPAN VLAN.