Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

From the Session ID list, select the session ID.

Select the Admin Mode True (enabled) or False (disabled) radio button for the selected 

session. 

When a particular session is enabled, any traffic entering or leaving the source ports of 
the session is copied (mirrored) onto the corresponding destination port or a remote 
switched port analyzer (RSPAN) VLAN. By default, the Admin mode is disabled.

Select the RSPAN Source VLAN from the list of available VLAN IDs.

Select the RSPAN Destination VLAN from the list of destination interfaces.

Configure the Filter Type. 

IP or MAC ACLscan mirror traffic that matches a permit rule. Possible values are as 
follows:

. No filter is configured for the session.

. Configure IP ACL.

. Configure MAC ACL.

Enter the Filter Name, if it is configured for the session.

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

You can configure basic or advanced sFlow settings.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.