Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

In the Source Interface list, select the management interface to be used for sFlow Agent. 

Possible values are as follows:

None

Routing interface

Routing VLAN

Routing loopback interface

Tunnel interface

Service port

By default, VLAN 1 is used as the source interface.

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

To refresh the screen with the latest information on the switch, click the Update button.

The following table describes the nonconfigurable information.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

Agent Version

Uniquely identifies the version and implementation of this MIB. The version 
string must use the following structure: MIB Version;Organization;Software 
Revision where:

MIB Version: '1.3', the version of this MIB

Organization: NETGEAR Inc.

Revision: 1.0

Agent Address

The IP address associated with this agent.