Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

By default VLAN 1 is used as the source interface.

To specify the DNS server to which the switch sends DNS queries, enter an IP address in 

standard IPv4 dot notation in the DNS Server Address field and click the Add button. 

The server appears in the list. You can specify up to eight DNS servers. The precedence 
is set in the order created. 

To remove a DNS server from the list, select its check box and click the Delete button.

If you click the Delete button without selecting a DNS server, all the DNS servers are 
deleted.

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

To refresh the screen, click the Update button.

The following table displays DNS Server Configuration information.

You can manually map host names to IP addresses or to view dynamic DNS mappings. 



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Serial No

The sequence number of the DNS server.

Preference

Shows the preference of the DNS server. The preference is determined 
by the order in which they were entered.