Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

Use File Type to specify what type of file to download:

. Archive (STK) code to download to the operational flash.

. Configuration s in text mode to update the switch’s configuration 

(Startup-config).

If the file has errors, the update is stopped. The factory default is Archive. 

Use Image Name to select one of the images from the list:

. Select image1 to download to image1.

. Select image2 to download to image2.

Only when File Type Archive is selected is the Image Name field visible.

Use the File Path field to give a path for the file to download. 

You can enter up to 146 characters. The default is blank.

Use USB File to give a name along with path for the file to download. 

You can enter up to 32 characters. The factory default is blank.

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

 displays the status of the file transfer to the switch. The last row of the 

table is used to display information about the progress of the file transfer. It is displayed 
only after the process starts. The screen refreshes automatically until the file transfer 
completes.

The system maintains two versions of the M6100/M7100/M5300 software in permanent 
storage. One image is the active image, and the second image is the backup image. The 
active image is loaded during subsequent switch restarts. This feature reduces switch down 
time when you are upgrading or downgrading the M6100/M7100/M5300 software.