Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

The following table describes the nonconfigurable information displayed on the screen.

You can use Ping or Traceroute and you can perform a memory dump.

You can tell the switch to send a ping request to a specified IP address. You can check 
whether the switch can communicate with a particular IP station. When you click the Apply 
button, the switch sends a specified number of ping requests and the results are displayed. 

If a reply to the ping is not received, the following message displays:

Tx = Count, Rx = 0 Min/Max/Avg RTT = 0/0/0 msec

If a reply to the ping is received, the following message displays:

Reply From a.b.c.d: icmp_seq = 0. time= xyz usec. 

Reply From a.b.c.d: icmp_seq = 1. time= abc usec. 

Reply From a.b.c.d: icmp_seq = 2. time= def usec. 

Tx = count, Rx = count Min/Max/Avg RTT = xyz/abc/def msec



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

Image Name

This displays the image name for the selected unit.

Active Image

The current active image of the selected unit.

Version

The version of the image1 code file.