Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configuration Examples
758
M6100, M5300, and M7100 Series Managed Switches
The portion of the active topology of the network that connects any two bridges in the same
MST Region traverses only MST bridges and LANs in that region, and never Bridges of any
kind outside the Region, in other words connectivity within the region is independent of
external connectivity.
MST Region traverses only MST bridges and LANs in that region, and never Bridges of any
kind outside the Region, in other words connectivity within the region is independent of
external connectivity.
MSTP Example Configuration
This example shows how to create an MSTP instance from the M6100/M7100/M5300 switch.
The example network has three different M6100/M7100/M5300 that serve different locations
in the network. In this example, ports 1/0/1-1/0/5 are connected to host stations, so those
links are not subject to network loops. Ports 1/0/6–1/0/8 are connected across switches 1, 2
and 3.
The example network has three different M6100/M7100/M5300 that serve different locations
in the network. In this example, ports 1/0/1-1/0/5 are connected to host stations, so those
links are not subject to network loops. Ports 1/0/6–1/0/8 are connected across switches 1, 2
and 3.
Figure 2. MSTP sample configuration
Perform the following procedures on each switch to configure MSTP:
1.
2.
Use the VLAN Membership screen to include ports 1/0/1–1/0/8 as tagged (T) or untagged
(U) members of VLAN 300 and VLAN 500 (see
195).
3.
From the STP Configuration screen, enable the Spanning Tree State option (see
231).
Use the default values for the rest of the STP configuration settings. By default, the STP
Operation mode is MSTP and the Configuration Name is the switch MAC address.
Operation mode is MSTP and the Configuration Name is the switch MAC address.