Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure System Information
79
M6100, M5300, and M7100 Series Managed Switches
Configure Green Ethernet Remote Device Details
To configure the Green Ethernet remote device information:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
Tx Low Power Idle Duration
(uSec)
(uSec)
This field indicates duration of Tx LPI state in 10 us increments. Shows
the total duration of Tx LPI since the EEE counters were last cleared.
the total duration of Tx LPI since the EEE counters were last cleared.
Tw_sys_tx (uSec)
Integer that indicates the value of Tw_sys that the local system can
support.
support.
Tw_sys_tx Echo (uSec)
Integer that indicates the remote system's Transmit Tw_sys that was
used by the local system to compute the Tw_sys that it wants to
request from the remote system.
used by the local system to compute the Tw_sys that it wants to
request from the remote system.
Tw_sys_rx (uSec)
Integer that indicates the value of Tw_sys that the local system
requests from the remote system.
requests from the remote system.
Tw_sys_rx Echo (uSec)
Integer that indicates the remote system’s Receive Tw_sys that was
used by the local system to compute the Tw_sys that it can support.
used by the local system to compute the Tw_sys that it can support.
Fallback Tw_sys (uSec)
Integer that indicates the value of fallback Tw_sys that the local system
requests from the remote system.
requests from the remote system.
Tx_dll_enabled
Data Link Layer Enabled: Initialization status of the EEE transmit Data
Link Layer management function on the local system.
Link Layer management function on the local system.
Tx_dll_ready
Data Link Layer ready: This variable indicates that the tx system
initialization is complete and is ready to update/receive LLDPDU
containing EEE TLV.
initialization is complete and is ready to update/receive LLDPDU
containing EEE TLV.
Rx_dll_enabled
Status of the EEE capability negotiation on the local system.
Rx_dll_ready
Data Link Layer ready: This variable indicates that the rx system
initialization is complete and is ready to update/receive LLDPDU
containing EEE TLV.
initialization is complete and is ready to update/receive LLDPDU
containing EEE TLV.
Time Since Counters Last Cleared Time Since Counters Last Cleared (since the time of power up, or after
EEE counters are cleared).
Table 27. Green Ethernet Local Device information (continued)
Field
Description