Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

Cumulative Energy Saving per 
Chassis (Watts * Hours)

Estimated cumulative energy saved per chassis in (watts * hour) when 
all green modes are enabled. 

Unit 

The Unit ID. 

Green Features supported on this 
unit

List of green features supported on the given unit, which could be one 
or more of the following: Energy-Detect (Energy Detect), Short-Reach 
(Short Reach), EEE (Energy Efficient Ethernet), LPI-History (EEE Low 
Power Idle History), LLDP-Cap-Exchg (EEE LLDP Capability 
Exchange), Pwr-Usg-Est (Power Usage Estimates). 

Interface 

Interface for which data is displayed or configured.

Energy Detect Admin mode

Enable or disable Energy Detect mode on the port. When this mode is 
enabled, when the port link is down, the PHY automatically goes down 
for a short period of time, then wakes up to check link pulses. This 
allows the switch to perform autonegotiation and save power 
consumption when no link partner is present. 

Energy Detect Operational Status Current operational status of the Energy Detect mode. 

Short Reach Admin mode

Enable or disable Short Reach Admin mode on the port. With Short 
Reach mode enabled, PHY is forced to operate in low power mode 
irrespective of the cable length. 

Short Reach Operational Status

Current operational status of the Short Reach mode. 

EEE Admin mode

Enable or disable Energy Efficient Ethernet mode on the port. With 
EEE mode enabled, the port transitions to low power mode during link 
idle conditions.