Honeywell RTH6350 Bedienungsanleitung

Seite von 40
9
10  If your system type is...
If your system type is:
q
 Single Stage Heat and Cool
Congratulations, you’re done!
If your system type is:
q
 Multistage Heat and Cool
q
 Heat Pump* without Backup Heat
q
 Heat Pump* with Backup Heat
q
 Heat Only
q
 Cool Only
Continue with Advanced Installation to match your thermostat to your system 
type.
*Heat Pump—an air conditioner that provides cooling in the summer, and also 
runs in reverse in the winter to provide heating.
If you are not sure of your system type or if you have other 
questions, call us toll-free at 1-800-468-1502.
This thermostat works on 24 volt or 750 mV systems. It will NOT work on 
120/240 Volt systems.
Advanced Installation
Enter System Setup
To enter system setup, press and hold both 
the 
s
 and FAN buttons until the display 
changes (approximately 5 seconds).
Changing Settings
1.  Press the 
s
 or 
t
 button to change the 
setting.
2.  Press NEXT to advance to the next 
function.
3.  Press DONE to exit and save settings. 
M28348
Function
Setting
Done
Next
1
0
M28349