Samsung 300 W 2.1 Ch Flat Soundbar HW-K4 Series Benutzerhandbuch
ENG
11
INSTALLATION
+
Controlling the Soundbar using your TV Remote Control
1. Press and hold the
SOUND button for more than 5 seconds while the Soundbar is turned on.
2. "ON - TV reMOTe" appears on the Soundbar's display.
3. In the TV's menu, set the TV speaker to external speaker.
3. In the TV's menu, set the TV speaker to external speaker.
●
TV menus differ by manufacturer and model. refer to the TV's user manual for further information.
●
Only the VOLuMe +/- and the MuTe buttons will be available to control the Soundbar.
●
This function is not available when the Soundbar is in the TV SoundConnect, TV ArC, or HDMI mode.
●
Manufacturers supporting this function:
- VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GruNDIG, Hisense, rCA
- This function may not be compatible with your TV's remote depending on the remote control's
manufacturer.
●
each time you press and hold the
SOUND button for 5 seconds, ON-TV reMOTe and OFF-TV
reMOTe alternate.
InSTALLIng THE BATTERy In THE REMOTE COnTROL
1. use a suitable coin to turn the
remote control's battery cover
counterclockwise to remove it
as shown in the figure above.
2. Insert a 3V lithium battery. Keep the
positive (+) pole facing up when inserting
the battery. Put the battery cover on and
align the '●' marks side by side as
shown in the figure above.
3. use a suitable coin to
turn the remote control
battery cover clockwise
as far as it will go to fix it
in place.