Samsung AX40H5000GM/MG Benutzerhandbuch

f

f

Before you use the product for the first time, remove the plastic packaging from the integrated HEPA/deodorization filter.

f

f

If you operate the air purifier without the filters, you cannot expect any air purification effect.

f

f

If the filter replacement indicator (

) blinks, replace the integrated HEPA/deodorization filter.

(The integrated HEPA/deodorization filter removes fine, invisible particles, gas and odor particles from the air. Postponing 
the filter replacement on the basis of a visual evaluation is not a desirable plan. The filter replacement cycle is the 
maximum usage period of the filter. The actual replacement cycle may vary depending on the operating environment.)

f

f

If a strange odor is coming from the product, the airflow from the product becomes weak or the recommended 
replacement cycle is reached, make sure to replace the integrated HEPA/deodorization filter.

f

f

Cleaning the Pre filter frequently improves the performance of the air purifier and helps keep the indoor air clean.

f

f

For the installation order and how to install the filters, refer to the Replacing the filters section in the Cleaning and 
Maintenance chapter.

f

f

Before replacing the filters, make sure to turn off the power.

Hold the left and right edges of the back cover, pull it forward slightly 
(

①) and then lift it up (②) to separate it. 

Dust sensor

Odor sensor

①

②

Insert the hooks of the back cover into the 
grooves at the bottom of the main body 
(

①) and press the edges of the back cover 

so that it fits into 8 holes (

②) of the main 

body.

f

f

If the hooks of the back cover is not 
properly locked into the grooves, back 
cover can not be assembled properly.

①

②

Back 

cover

362 mm x 477 mm x 211 mm  

41.6 m

 (448 ft

)

❋

❋

The design and specifications of the product are subject to change without notice for product improvement purposes.

ACR JUPITER SAUID_IB_05554A-00_EN.indd   11

2015-07-02   오전 10:34:21