Samsung HT-FS9200 Benutzerhandbuch

| 

  English

Media Play

Ripping

1. 

Insert a USB device into the USB jack on the front 
of the product. 

2. 

With the Playback screen displayed, select the 
Options button and then press the E button. 
The Options menu appears.

3. 

Use the ▲▼ buttons to select Ripping, and then 
press the E button. The Ripping screen appears.

4. 

Use the ▲▼ buttons to select a track, and then 
press the E button. A check appears to the left of 
the track.

5. 

Repeat Step 4 to select and check additional tracks.

6. 

To remove a track from the list, move to the track, 
and then press the E button again. The check on 
the track is removed.

7. 

When done, select the Rip button using the ▲▼ 
buttons, and then press the E button. 
The Rip pop-up appears.

8. 

Use the ▲▼ buttons to select the device to store 
the ripped files on, and then press the E button.

| NOTES |

 

Do not disconnect the device while ripping is in 
progress.

9. 

If you want to cancel ripping, press the E button 
and then select Yes. Select No to continue ripping.

10.  When ripping is complete, the “Successfully ripped.” 

message appears. Press the Ebutton.

11.  Press the RETURN button to go back to the 

Playback screen.

| NOTES |

 

This function is not available with DTS Audio CDs.

 

This function may not be supported by some discs.

 

Ripping encodes music to the .mp3 format at 
192kbps.

 

On the Ripping screen, you can also choose Select 
All or Deselect All.

 

- Use Select All to select all tracks and press the E 

button. This cancells your individual track selections.

 

- Use Deselect All to deselect all selected tracks at 

once.

Using Bluetooth

You can use a Bluetooth device to enjoy music with high 
quality stereo sound, all without wires!

What is Bluetooth?

Bluetooth is a technology that enables Bluetooth-
compliant devices to interconnect with each other easily 
using a short wireless connection.

•  A Bluetooth device may hum or malfunction:

 

- When a part of your body is in contact with the 

receiving/transmitting system of the Bluetooth device 
or the Home Cinema.

 

- When it is subject to electrical variation from 

obstructions caused by a wall, corner or office 
partitioning.

 

- When it is exposed to electrical interference from 

same frequency-band devices including medical 
equipment, microwave ovens and wireless LANs.

•  Pair the Home Cinema with the Bluetooth device while 

the two are close together.

•  The further the distance is between the Home Cinema 

and the Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational 
range, the connection is lost.

•  In poor reception-sensitivity areas, the Bluetooth 

connection may not work properly.

•  The Home Cinema has an effective reception range 

of up to 10 meters in all directions if there are no 
obstacles. The connection will be automatically cut off 
if the device is out of this range. Even within this range, 
the sound quality may be degraded by obstacles such 
as walls or doors.

•  This wireless device may cause an electric interference 

during its operation.

To connect the Home Cinema to a 

Bluetooth device

Connect 

Bluetooth device

Check if the Bluetooth device supports the Bluetooth 
compliant stereo headset function.

HT-FS9200-XU_0604.indd   36

HT-FS9200-XU_0604.indd   36

2013-06-04   오전 10:33:38

2013-06-04   오전 10:33:38