Samsung SCC-B5311P Benutzerhandbuch

2.  Switch 2 (LSS): This sens-up mode accumulates the image fields in memory to reduce 

noise but increase the brightness and contrast rate. When this switch is set to 

ON, the 

camera automatically switches to a maximum of 128 times of image acquisition speed to 

implement a clear picture for darker image.

3.  Switch 3 (H-REV): When this switch is set to ON, the camera image is reversed horizontally. 

If you want to monitor your site using a mirror, you can use this feature to see the right 

image.

4.  Switch 4 (V-REV): When this switch is set to ON, the camera image is reversed vertically. 

If your camera reluctantly displays the vertically reversed image, you can use this feature to 

see the right image.

5.  Switch 5 (BLC): When this switch is set to ON, you can view a clear image even though the 

camera faces any excessive light such as sunlight and fluorescent light. When it is set to 

OFF, the subject with excessive light is not clearly shown.

6.  Switch 6 (AGC): When this switch is set to ON, the camera automatically increase the 

sensitivity by amplifying the video signal when the strength of the signal falls below a given 

value. When any dark images are expected, use this feature.

7.  Switch 7 (D/N): When this switch is set to ON, the camera automatically switches between 

color and B&W according to the brightness of the vicinity.  

8.  Switch 8 (AWB): This switch adjusts white balancing. When this switch is set to ON, this 

camera operates in ATW mode, and in case of 

OFF, this camera operates in AWC mode.

 

ATW (Auto Tracking White Balance): The color temperature is automatically adjusted according to the 

environmental change. (Approx. 2000°K to 11,000°K)

 

AWC (Auto White Balance Control): It stores the color temperature just when the switch is changed to 

OFF. Accordingly color temperatures are adjusted by the stored value.

AB68-00647C(01)Eng.indd   11

2007-05-14   ｿﾀﾈﾄ 4:23:11