Samsung SHR-5082P Benutzerhandbuch

backup _

06

BACKUP

If there is a predefined device connected, the 

window displays the device information like 

the free space and such. You can also use the 

BACKUP button on the front of your DVR. 

To configure the related settings

1.  Set the start date and time using the 

Direction buttons and the ENTER button. 

2.  Set the end date and time using the 

Direction buttons and the ENTER button.

3.  Select a channel for backup using the 

Direction buttons and the ENTER button.

4.  Optional: If you want to change the current 

file name, use the virtual keyboard. The file 

name format is HHMM (maximum 4 digits) 

and the format of folder is YYYYMMDD. 

5.  When multiple devices are connected, press 

USB Memory at the bottom-left corner to 

select a backup device. If you select the 

built-in CD or USB CD/DVD, the recording 

format is fixed to AVI. When 

Check is 

selected, the file size of the selected time 

and channel, and residual memory size of 

the device are displayed.

6.  When all settings are complete, press Start 

to begin the backup process. When the backup 

starts, the backup progress is displayed. If you 

select Stop on the progress window, the backup 

stops. If you select Exit, the screen changes to 

the upper menu without stopping the backup.

In case of SHR-5160 and SHR-5080, they 

do not include the built-in DVD writer so that 

backup function is not available for built-in  

CD/DVD.

[In Backup Process]

If you press 

Exit while the backup is in 

progress, the screen goes to the upper 

menu but it does not affect the backup 

process. The running speed of the 

product may be lowered while the backup 

is in progress.

When performing backup on USB CD/

DVD or memory, you cannot use the 

actual capacity of the device because a 

part of the capacity is used for the system. 

This device doesn’t support the backup 

for memory cards, flash cards, and 

memory sticks such as SD, CF, MMC, 

etc. The virtual keyboard does not support 

the input of special characters or space.

When the CD or DVD is malfunctioning, 

its tray frequently opens and closes, and 

then the backup fails. In this case, retry 

the backup after exchanging the media.

The backup data could be damaged by 

the surface state of the disk when using 

CD or DVD.

The DVR may restart if you attempt to 

eject the backup device while the backup 

is in progress.

The file name is created with the start time of 

backup data. 

(YYYYMMDD)/(HHMM+ four digits of the serial 

number) 

The backup file can be separated in the 

following conditions:

- Different units in file size (1GB for DVD, 2GB 

for others)

- Change in recording conditions 

- Discontinuous recording data
Codec is required to play an AVI backup file, 

which is also copied along with the installation file 

in the AVI backup process. Run a codec setup 

file, “MP4Codec.exe”, to install the codec on the 

PC. “INDEX.xml” is included in the AVI backup file, 

which enables you to check and enjoy a desired 

file at your convenient time. In case of USB 

external HDD and USB Flash Memory, the backup 

is available only with formatting FAT32 partition. 

To format FAT32, Format the device as FAT32 in 

the PC or erase the device in the Storage Setup 

menu, which enable to backup files.
In case of back-up devices, please check the 

compatibility list of the storage devices. The 

list of the compatible devices with Samsung 

DVR can be obtained from your vendor.
The backup of the AVI format may take longer 

depend on a number of the channel and the DVR 

operation environment (e.g. recording, network)

In case of SHR-5082/5080, only 8 channels 

are displayed.

backup

Backup

Folder/Filename

20070131/ 1017

Start Date / Time

End Date / Time

2007-01-31 10:17:10

2007-03-31 10:17:20

CH

CH 1

CH 2

CH 3

CH 4

CH

CH 5

CH 6

CH 7

CH 8

CH

CH 9

CH 10

CH 11

CH 12

CH

CH 13

CH 14

CH 15

CH 16

SHR-5160_Eng-C2~C9.indd   37

2007-11-05   오후 2:10:16