Samsung SHR-6160P Benutzerhandbuch
16_
installation
installation
Adding a HDD
Make sure to unplug the power cord from the wall outlet before proceeding with the installation.
Number of HDDs to install : SHR-6082/6162/6164 : Default 1 HDD + Up to 4 HDDs added
SHR-6080/6160/6163 : Default 1 HDD + Up to 5 HDDs added
By factory default, the unit is equipped with one HDD.
The following instructions are when you have installed the maximum number of HDDs on the master unit.
The following instructions are when you have installed the maximum number of HDDs on the master unit.
First, loosen the screws in the left and right sides
and remove the cover.
and remove the cover.
1) If adding HDDs to SHR-6080, 6160 & 6163
For SHR-6082/6162/6164 models, see the following page.
Loosen the screws (x4) in the left/right and upper
sides and remove the upper and lower brackets.
sides and remove the upper and lower brackets.
Install HDDs (x3) on the lower bracket and fi x them
with screws.
with screws.
The screw (UNC 6-32) to use in the installation comes with
the HDD.
the HDD.
Firmly secure the screw so that it can not get loose from
such as vibration.
such as vibration.
Install HDDs (x2) on the upper bracket and fi x them
with screws.
with screws.
M
1.
M
2.
3.
4.
Cover
Upper Bracket
Lower
Bracket
Bracket
Lower Bracket
Upper Bracket
Add
Installed by
default
default
Add
Add
Add
Add