Samsung HW-H450 Benutzerhandbuch
14
CONNECTIONS
●
Before moving or installing the product, be sure to turn off the power and disconnect the power
cord.
cord.
●
If the main unit is powered off, the wireless subwoofer will be in standby mode and the STANDBY
LED on the upper side will come on after the Link indicator (Blue LED) blinks for 30 seconds.
LED on the upper side will come on after the Link indicator (Blue LED) blinks for 30 seconds.
●
If you use a device that uses the same frequency (2.4GHz) as the Soundbar near the Soundbar,
interference may cause some sound interruption.
interference may cause some sound interruption.
●
The transmission distance of the wireless signal between the main unit and subwoofer is about 33
ft., but may vary depending on your operating environment. If a steel-concrete or metallic wall is
between the main unit and the wireless subwoofer, the system may not operate at all, because the
wireless signal cannot penetrate metal.
ft., but may vary depending on your operating environment. If a steel-concrete or metallic wall is
between the main unit and the wireless subwoofer, the system may not operate at all, because the
wireless signal cannot penetrate metal.
●
If the main unit doesn't make a wireless connection, follow steps 1-5 to re-set the connection
between the main unit and wireless subwoofer.
between the main unit and wireless subwoofer.
●
The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from water
and moisture.
and moisture.
●
For optimal listening performance, make sure that the area around the wireless subwoofer location
is clear of any obstructions.
is clear of any obstructions.
HW-H450_USA_ENG_141104.indd 14
HW-H450_USA_ENG_141104.indd 14
2014-11-04 4:52:37
2014-11-04 4:52:37