Samsung Freestanding Gas Ranges (NX58H9500 Series) Installationsanleitung

03 
INS
TALLA

TION

 REQUIREMENT

S

Minimum dimensions

If overhead cabinets are provided, a range hood should also be provided 

that projects horizontally a minimum of 5 in (12.7 cm) beyond the front of 

the cabinets. This will dissipate any heat buildup in the overhead cabinets 

to prevent death, personal injury, and/or fire hazard. The ventilating hood 

must be constructed of sheet metal not less than 0.0122" thick. Install 

above the cooktop with a clearance of not less than 1/4" between the hood 

and the underside of the combustible material or metal cabinet. The hood 

must be at least as wide as the appliance and centered over the appliance. 

Clearance between the cooking surface and the ventilation hood surface 

must never be less than 24 inches.

Exception 1 : Installation of a listed microwave oven or cooking appliance 

over the cooktop shall conform to the installations packed with that appliance.
•  30-in (101.6-cm) minimum clearance between the top of the cooking 

surface and the bottom of an unprotected wood or metal cabinet; or If no 

30-in(101.6-cm) minimum clearance, 24-in (61-cm) minimum when the 

bottom of the wood or metal cabinet is protected by not less than 0.25-in 

(0.64-cm) flame-retardant millboard covered with not less than no. 28 

MSG sheet steel, 0.015-in (0.038-cm) stainless steel, 0.024-in (0.061-

cm) aluminum, or 0.020-in (0.051-cm) copper.

•  18-in (45.7-cm) minimum between the countertop and the adjacent 

cabinet bottom.

Exception 2 : For island installation, maintain 2-1/2" minimum from cutout 

to back edge of countertop and 4" minimum from cutout to side edges of 

countertop.

Installation guide

24”

3”

25”

23 3/16”

35-7/8”

3”

1”min

1/2”min

Hatched Faces should be

flat and leveled.

25”

3”

24”

3”

A: Cabinet opening 30" (76.2 cm)
IMPORTANT:  If your cabinet have height over 36-4/5", this range cannot be installed 

without supporting unit like hard block.