Samsung RT21M6211SR Benutzerhandbuch
English 27
Ins
tallation
tallation
STEP 2 Flooring
• The surface to install the refrigerator
must support a fully loaded refrigerator,
or approximately 90 kg.
or approximately 90 kg.
• To protect the floor, put a large piece
of cardboard on each leg of the
refrigerator.
refrigerator.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to, use a thick paper or cloth such
as old carpets along the movement path.
necessary to protect the floor. If you
have to, use a thick paper or cloth such
as old carpets along the movement path.
STEP 3 Adjust the levelling legs
Level the refrigerator by manually
adjusting the levelling legs. Turn the
levelling legs clockwise to lower the
position, or turn counter clockwise to raise.
For safety reasons, adjust the front side a
little higher than the rear side.
adjusting the levelling legs. Turn the
levelling legs clockwise to lower the
position, or turn counter clockwise to raise.
For safety reasons, adjust the front side a
little higher than the rear side.
A
Leave the legs at least (A) mm from the
floor as shown.
• (A) 39 mm for RT18*
• (A) 43 mm for RT21*
floor as shown.
• (A) 39 mm for RT18*
• (A) 43 mm for RT21*
Untitled-5 27
2017-02-13 12:55:10