Samsung HT-J4500 Benutzerhandbuch

9

 - English

 

* HT-J4550 only - Front/Surround Speakers
1.  Turn the Stand Base upside-down and 

connect it to the Stand.

2.  Use the driver to combine the screws on the 3 

marked holes.

3.  Straighten a supplied speaker wire and put in 

the hole on the centre of Stand Base.

4.  Connect the upper Speaker to the assembled 

Stand.

5.  Insert a screw clockwise into the hole on the 

rear of the speaker using a screwdriver.  
And then connect a speaker cable.

6.  This is the appearance after the speaker is 

installed. 
Follow this steps to install other speaker.

1.  Match each speaker cable bundle to the correct speaker by matching the colour coded plug on 

each bundle to the coloured sticker on the bottom of each speaker.

2.  Connect the speaker wire plugs from each speaker to the back of the product by matching the 

colours of the speaker plugs to the colours of the speaker jacks.

Stand Base 

Stand  

Speaker

Stand  

HT-J4500_XU-ECO_0306.indd   9

2015/3/9   14:38:46