Samsung SMO-210TRP Benutzerhandbuch

2)  Press ENTER (in the middle of the Rotary Wheel) to replay the event

in Event Replay mode. Up to 16 screens can be replayed centering on
the time of the Alarm. The duration of Replay is displayed in a graph.
Turn the Rotary Wheel during the Replay to forward or reverse the
stored screens one by one. 
Press ENTER to terminate the Event Replay. The Event Replay will
continue until ENTER has been pressed.

3)  Alarm occurrence information is stored in the “EVENT LIST”.

4)  Alarm Out (HOT, COLD) signals are active during the “ALARM

HOLD TIME. ”

•  ALARM HOLD TIME : Time during which the Alarm function

is carried on after the Alarm is first detected. Alarm Hold Time
is reset automatically when Event Replay is turned on.

5)  Recording output continues in Normal mode until the Alarm is

cleared. The recording frequency of the corresponding channel
increases.  

6)  Signals change as the Alarm occurs and later clears.

The Motion option only becomes available when a camera with
Motion features is connected.  
1)  When a Motion trigger is received, a warning buzzer sounds and

the screen is divided into 9 Live-Mode sub-screens. The word
“EVENT ”appears on the screen and the Motion occurrence infor-
mation is displayed at the bottom right of the screen.

2)  Press ENTER (in the middle of the Rotary Wheel) to replay the event

in Event Replay mode. Up to 16 screens can be replayed centering on
the time of the Motion occurrence.
The duration of the replay is displayed in a graph.
Turn the Rotary Wheel during the Replay to forward or reverse the
stored screens one by one.
Press ENTER to terminate the Event Replay. The Event Replay will
continue until ENTER has been pressed.

3)  Motion occurrence information is stored in the “EVENT LIST”.  
4)  Alarm Out (HOT, COLD) signals are active during “ALARM

HOLD TIME”.

5)  Recording output continues in Normal mode until the Motion is

cleared. The recording frequency of the corresponding channel
increases. 

6)  Signal output continues as the Motion occurs and later clears. 

1)  When the Loss occurs, a warning buzzer sounds and the screen is

divided into 9 Live-Mode sub-screens. The word “EVENT” and
Loss channel appears on the screen and the corresponding channel
appears Blue Black. 
When more than one Loss occurs, that channel number display
switches to Blue-Black with a 1 second interval. 

2)  Press ENTER (in the middle of the Rotary Wheel) to replay the event

in the Event Replay mode. Up to 16 screens can be replayed centering
on the time before the Loss occurrence. The duration of the Replay is
displayed in a graph.
Turn the Rotary Wheel during the Replay to forward or reverse the
stored screens one by one. 
Press ENTER to terminate the Event Replay. The Event Replay will
continue until ENTER has been pressed. 

04/01/01          12:30:30

EVENT

CH2                 CH3

CH4                    CH5                 CH6

CH7                    CH8 

1

ALARM
04/01/01
12:29:30

150ms or Above 

VCR Trigger

Trigger ignored

Recording 
Output

Time Lapse Mode

Normal Mode

Time Lapse Mode

Alarm Output

Alarm Reset Output

Alarm/Motion Occurrence

Alarm Reset

04/01/01          12:30:30

EVENT

CH2                 CH3

CH4                    CH5                 CH6

CH7                    CH8 

1

MOTION

04/01/01
12:29:30

04/01/01          12:30:30

EVENT

CH1                    CH2                 CH3

CH4                    CH5                 CH6

CH7                    CH8 

M12345678    

04/01/01          12:30:30          L12345678

EVENT

CH1                    CH2                 CH3

CH4                    CH5                 CH6

CH7                    CH8 

04/01/01          12:30:30           L12345678

EVENT

CH2                 CH3

CH4                    CH5                 CH6

CH7                    CH8 

1

LOSS

04/01/01
12:30:00

Eng-17