Samsung AR12FSFTKWQN Benutzerhandbuch

•   Check if you have selected Auto/Dry/

 mode. In 

these modes, desired temperature is set to auto and you 

cannot adjust the temperature.

•   Check if you have selected Auto/Dry/Turbo/

 

mode. In these mode, fan speed is set to Auto and you 

cannot adjust the fan speed.

•  Check if your batteries are depleted.

•  Make sure nothing is blocking your remote controller

   sensor.

•   Check that there are strong lighting apparatus near the air

conditioner. Strong light which comes from fluorescent 

bulbs or neon signs may interrupt the electric waves.

•   Check if you press the Set button on the remote controller 

after you have set the time.

•   Press the Power   button or disconnect the power plug/

switch off the auxiliary power switch.  

If the indicator is still blinking, contact the service center.

•   Check if the appliance is running in a smoky area. Ventilate

the room or operate the air conditioner in Fan mode for 

1~2 hours. (We do not use smelly components in the air 

conditioner.)

Error is indicated. •   When an indoor unit indicator blinks, contact the nearest

service center.

•   Depending on the status of the air conditioner usage, noise

can be heard when refrigerant flow movement changes. It is 

normal.

•   If may not be a fire but it can be a steam generated by the

defrost operation from outdoor heat exchanger during Heat 

mode in winter.

•  Water may be generated because of the temperature

    difference. It is normal.

Boracay ET_AR09FSFT@_IBIM_DB68-03377A_EN-7.indd   25

2014/12/11   17:23:04