Samsung OTR Microwave Installationsanleitung

16

FOR EASIER INSTALLATION AND PERSONAL 

SAFETY, WE RECOMMEND THAT TWO PEOPLE 

INSTALL THIS MICROWAVE OVEN.

NOTE: If your cabinet is metal, use the nylon 

grommet around the power cord hole to prevent 

cutting of the cord.

NOTE: Filler blocks are required when mounting this 

unit under any cabinet with a recessed bottom or 

front overhang. (See page 9.)

NOTE: When mounting the microwave oven, thread 

power cord through hole in bottom of top cabinet. 

Keep it tight throughout Steps 1–3. Do not pinch 

cord or lift oven by pulling cord.

1.  Lift microwave, tilt it 

forward, and hook slots 

at back bottom edge 

onto four lower tabs of 

mounting plate.

2.  Rotate front of oven 

up against cabinet 

bottom.

3.  Insert a self-aligning screw through top center 

cabinet hole. Temporarily secure the oven by 

turning the screw at least two full turns after 

the threads have engaged. (It will be completely 

tightened later.) Be sure to keep power cord 

3.  Place the mounting plate against the wall and 

insert the toggle wings into the holes in the wall 

to mount the plate.

NOTE: Before tightening toggle bolts and wood 

screw, make sure to coincide bottom line of the 

Mounting plate with Horizontal line of “Rear wall 

Template” and then the Mounting plate is properly 

centered under the cabinet.

CAUTION: Be careful to avoid pinching fingers 

between the back of the mounting plate and the wall.

4.  Tighten all bolts. Pull the plate away from the wall 

to help tighten the bolts.

You need to drill holes for the top support screws 

and a hole large enough for the power cord to fit 

through.

•  Read the instructions on the TOP CABINET

TEMPLATE.

•  Tape it underneath the top cabinet.
•  Drill the holes, following the instructions on the

TOP CABINET TEMPLATE.

CAUTION: Wear safety goggles when drilling holes 

in the cabinet bottom.

SMH8165_XAA DE68-03587A-07-EN.indd   16

13/01/2015   17:40:34