Samsung NP-R410P Benutzerhandbuch

76

  Click 

General tab and select a LAN driver from

Connect using:. Select Internet Protocol(TCP/IP) 
and click 

Properties.

The displayed LAN driver may vary depending on the

LAN device type.
Click 

Install to add a network component as shown in 

the figure below: You can add a client, a service, or a

protocol.

 Configure IP settings. 

Select 

Obtain an IP address automatically when 

using DHCP. If you use a static IP, select

following IP address and enter the values. 

If the IP of your computer is not automatically assigned,

contact the network administrator.

 If all settings are made, click

OK. Now the network

configuration is finished.