Samsung 2015 Multiroom Curved Soundbar W/ Wireless Subwoofer Benutzerhandbuch

To launch the Samsung Multiroom app, tap the Multiroom app icon on your smart device.

On your smart device, select the Samsung Multiroom app. Follow the directions on your smart device’s screen.

 

● Use Cat 7 (*STP Type) cable for the connection. 

* Shielded Twist Pair

USing The neTwOrk STandby On 
FUnCTiOn

The network Standby On function becomes available if a wireless connection has been properly established 
between a smart device and the Soundbar. This function turns on the Soundbar automatically when a smart 
device attempts to connect to the Soundbar via bluetooth or wi-Fi. if you turn the Soundbar on via a 
bluetooth connection, its input mode is set to bT automatically. To turn the Soundbar on via wi-Fi, you must 
have the Samsung Multiroom app installed on your smart device.

1.+ Connect the smart device to your Soundbar.

2.+ Turn the network Standby On function on by pressing the ] button on the Soundbar remote for more 

than 5 seconds. you can turn the function off by pressing the ] button again for more than 5 seconds.

  

● network Standby On is available only if the Soundbar is listed among the smart device’s paired 

devices. (The Smart device and the Soundbar must have been previously paired at least once.)

● Soundbar will appear in the smart device’s searched devices list only when the Soundbar is 

displaying [bT ready] or [wiFi ready].

● in the TV SoundConnect mode, the Soundbar cannot be paired to another smart device.

● if the network Standby On function did not work:

 

- The network Standby On is set to Off. Set it to On.

● The wi-Fi connection to the Soundbar will be terminated if the Soundbar’s power cord is 

disconnected or the power is cut off. if the power is cut off, turn on the Soundbar and reconnect it.