Samsung MM-DA25 Benutzerhandbuch
10
Loudspeakers
•
Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
position, facing inwards (about 45°) toward you.
•
Place the speakers so that their tweeters will be at
the same height as your ear.
the same height as your ear.
•
Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause
performance degradation of the speaker.
performance degradation of the speaker.
•
Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident
caused by falling of the speaker.
caused by falling of the speaker.
•
Do not take the speaker apart from TV or computer monitor.
The speaker near the TV or computer monitor may influence the quality of the screen display.
The speaker near the TV or computer monitor may influence the quality of the screen display.
Position of the DVD Player
•
•
Place it on a stand or cabinet shelf, or under
the TV stand.
the TV stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
9
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
R
L
Directions in Installing Speaker
VIDEO OUT
COMPONENT VIDEO OUT
Right Speaker
Left Speaker
CONNECTIONS
Please be sure to turn off the power and unplug the power cord before moving or installing this unit.
Please choose one of three video connection methods.
Please choose one of three video connection methods.
Connecting to a TV
VIDEO OUT
COMPONENT VIDEO OUT
METHOD 1
METHOD 3
METHOD 2
Scart ...............
Better Quality
If your television is equipped with an SCART input, connect an Scart Jack (not supplied) from the
AV OUT jack on the back panel of the system to the SCART IN jack on your television.
AV OUT jack on the back panel of the system to the SCART IN jack on your television.
METHOD 1
Composite Video ...............
Good Quality
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.
system to the VIDEO IN jack on your television.
VIDEO SELECT Function
Press and hold Number 0(VIDEO SEL) button on the remote control for over 5 seconds.
•
Press and hold Number 0(VIDEO SEL) button on the remote control for over 5 seconds.
•
"
COMPOSITE" or "RGB" will appear in the display.
At this time, press the Number 0 (VIDEO SEL) button shortly to select between "
COMPOSITE" and "RGB".
•
If Scart (RGB Input) is equipped for your TV, press Number 0 (VIDEO SEL) button to select RGB mode.
You can get a better picture quality by using Scart setting.
You can get a better picture quality by using Scart setting.
•
If Scart (RGB Input) is not equipped for your TV, press Number 0 (VIDEO SEL) button to select COMPOSITE
mode.
mode.
METHOD 3
Component (Progressive Scan) Video ...............
Best Quality
If your television is equipped with Component Video inputs, connect a component video cable (not
supplied) from the Pr, Pb and Y jacks on the back panel of the system to the corresponding jacks on
your television.
supplied) from the Pr, Pb and Y jacks on the back panel of the system to the corresponding jacks on
your television.
COMPONENT SELECT Function
Use this method if your TV have Pr,Pb,and Y jacks.
METHOD 2
1.With the main unit turned off,press and hold the Number 8(COMPONENT SEL.) button on the remote control
for over 5 seconds.
• <Y Pb Pr> or ,<RGB> will appear in the display.
2,Press the Number 8(COMPONENT SEL.) button shortly to select<Y Pb Pr> to set the main unit to
COMPONENT mode.
for over 5 seconds.
• <Y Pb Pr> or ,<RGB> will appear in the display.
2,Press the Number 8(COMPONENT SEL.) button shortly to select<Y Pb Pr> to set the main unit to
COMPONENT mode.
MM-DA25(1p~28p)-GB-ELS-4.18 4/18/08 9:00 Page 12