Samsung 家庭劇院 HT-J5530K Benutzerhandbuch

 - 

English

 

Connections

Installing the Speakers on the Tallboy Stand

* HT-J5530K only - Front Speakers
  HT-J5550K/J5550WK only - Front/Surround 

Speakers

1.  Turn the Stand Base upside-down and connect 

it to the Stand.

2.  Use the driver to fasten the screws (5x20) on the 

4 marked holes.

3.  Straighten the provided speaker cable and run it 

through the center hole of the Stand Base. 

4.  Connect the upper Speaker to the assembled 

Stand.

5.  Insert a screw (5x15) and fasten it lockwise 

through the hole on the rear of the speaker 

using a screwdriver.

6.  Arrange the speaker cable along the groove on 

the rear side of the stand pole.

7.  Connect the arranged speaker cables to the 

port on the speaker’s rear side while matching 

their colors.

8.  This is the appearance after the speaker is 

installed. 

Follow this steps to install other speaker. 

Speaker Cable Connections

1.  Match each speaker cable bundle to the correct speaker by matching the colored band on each bundle to 

the colored sticker on the bottom or back of each speaker.

2.  Connect the speaker wire plugs from each speaker to the back of the product by matching the colored 

band on each cable to the colors of the speaker jacks. When connecting, make sure to match label color 

on the back of speaker.

2

4

1

3

Stand Base 

Stand  

Speaker

Stand  

5

7

6

8

Or  

02831P-HT-J5500K_J5530K_J5550K(W)-ZW-ENG-0224.indd   10

2015/3/12   14:26:31