Samsung 家庭劇院 HT-J5530K Benutzerhandbuch

 - 

English

 

Settings

 

✎

To delete all Preset FM stations at once, press the 

TITLE MENU

 button for about 5 seconds in FM 

Manual mode until 

DEFAULT PRESET appears 

on the display.

Recording FM Radio

You can record your favorite radio broadcast on a 

USB storage device.
1.  Insert a USB device into the USB jack on the 

front of the product.

2.  Press the 

FUNCTION

 button to select 

FM, and 

then press the 

TUNING UP

, 

DOWN

 button to 

select the station you want to record.

3.  Press the 

RED (A)

 button to start recording. The 

recording process begins.

 ~ The recorded time is displayed on the left and 

the recording time still available, based on 

the amount of free space in the USB storage 

device, is displayed on the right.

4.  Press the 

EXIT

 button to finish your recording. 

The recording is stopped and saved as an .mp3 

file at the same time. To play the recorded file, 

refer to "Playing Files on a USB Device".

 

✎

The recorded file is saved in the 

Tuner folder which 

is created automatically.

 

✎

Only the 

5V 0.5A

 (OPEN/CLOSE), 

5V 0.5A

 (POWER), 

EXIT

, 

MUTE

, and 

VOLUME +

/

-

, buttons are operable 

while FM radio is being recorded.

 

✎

If you don't press any buttons while recording, the 
screen saver will be enabled.

 

✎

Sound effects, such as DSP, EQ, etc., are not 
recorded during FM radio recording.

 

✎

The radio is recorded at a set, default volume 
even if you change the volume or press the 

MUTE

 

button during the recording process.

 

✎

If you remove the USB device or Power Cable 
during the recording process, the portion of the 

file which has already been recorded may not play 

back.

 

✎

Recording will not start if the remaining free space 
in the USB storage device is less than 2MB.

 

✎

If the USB device is removed or has insufficient 
space (under 2MB), the appropriate message is 

displayed and the recording stops.

Network Setup

When you connect this product to a network, you 

can use network based applications and functions 

such as BD-LIVE and upgrade the product's software 

through the network connection.

Configuring Your Network Connection

To begin configuring your network connection, follow 

these steps:
1.  In the Home screen, select Settings, and then 

press the v button.

2.  Select Network, and then press the v button.
3.  Select Network Settings, and then press the 

 button.

4.  Go to the instructions for Wired networks starting 

below or the instructions for Wireless networks. 

(See page 22)

Wired Network

Ğ

Ğ

Wired – Automatic

After following Steps 1 to 3 above:
1.  In the Network Settings screen, change 

Network Type to Wired. Then, select Connect 

and press the v button. The product detects 

the wired connection, verifies the network 

connection, and then connects to the network.

2.  When it is done, highlight OK, and then press 

 button.

Ğ

Ğ

Wired - Manual

If you have a static IP address or the automatic 

procedure does not work, you'll need to set the 

Network Settings values manually.
After following Steps 1 to 3 above:
1.  In the Network Settings screen, change 

Network Type to Wired. Then, select Connect 

and press the v button. 

The product searches for a network, and then 

displays the connection failed message.

 

✎

If it is possible to connect the home theater to 
your network wirelessly, select 

Change Network 

at this point, change the 

Network Type to 

Wireless, and then go to the instructions for 

wireless networks. (See page 22)

02831P-HT-J5500K_J5530K_J5550K(W)-ZW-ENG-0224.indd   21

2015/3/12   14:26:35