Samsung DV42H5200 Secadora con Super Speed, 7,5 ft3 Benutzerhandbuch

Shirts, Trouser, Comforter, 
Pillows (Confirm that the 
laundry load is dry)

This cycle is best for smoothing out wrinkles and 
reducing odors from loads consisting of one to four dry 
items. In this cycle a small amount of water is sprayed 
into the dryer drum after several minutes of tumbling 
with heat.

Shirts, Trouser, Blouses 
(Confirm that the laundry 
load is dry)

The WRINKLE AWAY cycle removes wrinkles from 
clothes stored in closets, etc. It provides wrinkle release 
via optimized steam care.
For best results, load 2-3 items at once.  
You can extend the drying time by a minimum of 
20 minutes, depending on the item type or load.

To reduce statics by clothing friction and spray steam at the later period of drying 
cycle.
It is only available with: NORMAL, HEAVY DUTY, PERM PRESS, DELICATES (Dry level of 
every course exceeds Normal) and TIME DRY course.
In order to reduce statics, the drum can be paused during operation.

Rack Dry is available in the TIME DRY cycle. Temperature will be set to Extra Low only. 
(Refer to the “Rack dry (DV42H5400* Only)” section on page 30.)

The mixed load bell that notifies you when the average dry level in a load is damp 
dry (80 % dried). This lets you take garments that you don’t want fully dried or that 
dry quickly out of the dryer early while letting others continue to dry. 
You can select this function in all Sensor Dry cycles except WOOL, SANITIZE. The dry 
level selections are limited to Normal Dry, More Dry, and Very Dry.

Wrinkle Prevent provides approximately 180 minutes of intermittent tumbling in 
unheated air at the end of the cycle to reduce wrinkling. Press the Wrinkle Prevent 
button to activate this feature.
The indicator light above the pad will illuminate when Wrinkle Prevent is selected.
The load is dry, and can be removed at any time during the Wrinkle Prevent cycle.

Choose your favorite cycle including cycle, temp, dry level option, etc. (Refer to the 
“My Cycle” section on page 32.)

Time can be added or subtracted from the automatically set times in the Manual Dry 
cycles (TIME DRY, QUICK DRY, or AIR FLUFF cycles) and WRINKLE AWAY cycle.
To add or subtract time from the cycle, press the Adjust Time arrow pad up or down 
until the desired time is displayed.

To control operation rate for drying a small loads at Sensor Dry course.
It is only available with: NORMAL, HEAVY DUTY, PERM PRESS and DELICATES course.
It can’t be selected/cancelled when the drying course is running.
In order to improve drying effect and control operation rate, the drum can be paused 
during operation.

DV42H5000_DC68-03381A-05_EN.indd   26

2015-05-28     11:23:55