Samsung New Boracay Split AC with Digital Inverter Technology, 1.0 TR Benutzerhandbuch

Fixing the indoor unit in place

Insulation

Pipes

'X' mm

Rubber leg

' mm

Perform the following work on the area where gas leak test was done priory .

After checking for gas leaks in the system, insulate the pipe, hose and cables .
Then place the indoor unit on the installation plate .
1. To minimise condensation problems, wrap foam insulation (as shown in the

figure) on a part without insulation on the end of the pipes.

2. Wind the pipe, assembly cable and drain hose with vinyl tape.

3. Place the bundle (the pipe, assembly cable and drain hose) in the lower part

of the indoor unit carefully so it does not project from the rear of the indoor
unit.

4. Hook the indoor unit to the installation plate and move the unit to the right

and left until it is securely in place.

• Make sure pipe does not move when you install the indoor unit on

an installation plate.

5. Wrap the rest of the pipe with vinyl tape.

6. attach the pipe to the wall using clamps (optional).

Install at the outdoor unit on stable base to help avoid the generation of noise and vibration,

especially when installing the unit close to a neighbor.

If you install the outdoor unit in a place exposed to strong winds or at a height, fix it with

appropriate support (wall or ground).

1. Place the outdoor unit as indicated on the top of the unit to let the discharged air out

properly.

2. Fix the outdoor unit with appropriate support using anchor bolts.

3. If the outdoor unit is exposed to strong winds, install shield plates around the outdoor

unit so that the fan can operate correctly.

Installation

plate

Connecting wires

Connecting

pipes

Vinyl tape

Drain hose

Fixing the outdoor unit in place

Model

✴✴

12✴✴

538

290

✴✴

18/24✴✴

660

340

• Ensure the wall will be able to support the weight of the rack and

outdoor unit;

• Install the rack close to the column as much as possible;
• Install proper grommet in order to help reduce noise and residual

vibration transferred by outdoor unit towards wall.

Outdoor unit installed on the wall by rack

Soft rubber designed to cut off

vibration from rack to wall.

(not supplied with product)

Designed to cut off residual vibration

from outdoor unit to rack.

(not supplied with product)

• Secure the rubber leg to help prevent the generation of noise and vibration.

English-49

aTIOn

RAC BORACAY_EN_Eco-inverter IBIM_05124A-00.indd 49

2014-12-18 오후 3:06:55