Apple powermac 8500 series Servicehandbuch
Basics
Memory Configurations - 15
Power Macintosh 8500 Series/WS 8550
The Power Macintosh 8500 and WS 8550 logic boards have
eight DRAM DIMM slots, each with a 64-bit data bus. You
can increase the DRAM to a total of 512 MB using 5-volt,
64-bit-wide, 168-pin fast-paged mode, 70 ns DIMMs.
Note:
These computers do not have any main memory
soldered to the logic board. At least one RAM DIMM must be
present for the computers to operate. DRAM DIMMs can be
installed individually; however, if you wish to take
advantage of the computer’s interleaving* capability, which
provides maximum performance, you must install the
DIMMs in matching pairs and in paired slots (A4 and B4, A3
and B3, and so on).
* Memory interleaving allows the computer to read or write
to its memory while other memory reads or writes are
occurring, thus providing for faster performance.