Alpine TMI-M990 Benutzerhandbuch

• The simultaneous function can only be used when an IONBUS

compatible head unit is connected.

• To output the AUX, NAVI. mode sound of TMI-M990 during

simultaneous operation, change the head unit source to AUX,
NAVI. mode. See (Operating from the Head Unit. “Switch-
ing the Source”, page 49).

• When the simultaneous function is active and you change the

head unit source, only the audio is switched and the simultane-
ous function is not cleared. To clear the simultaneous function,
press V.SEL/DISP.OFF on the main unit to switch to video
and audio from the same source.
The simultaneous function can also be cleared by linking to
when the DVI-9990R/DVI-9990E source switches. (General
Setup Operation “Head Unit Linked Functions” page 43)

○○○○○○○○○○○○○○○

○

When Blackout mode is turned on, the display will turn off. The backlight life can be extended.

Press and hold V.SEL/V.MUTE for at least 2 seconds to start the blackout mode.
By doing so the display will turn off.

To cancel Blackout mode, press and hold V.SEL/V.MUTE for at least 2
seconds.

• If any button on the unit is pressed during Blackout mode, the function will be displayed for

5 seconds to show the operation before returning to Blackout mode.

Press and hold V.SEL/DISP.OFF for at least 2 seconds to start the blackout
mode.
By doing so the display will turn off.

To cancel Blackout mode, press and hold V.SEL/DISP.OFF for at least 2
seconds.

• If any button on the unit is pressed during Blackout mode, the function will be displayed for

5 seconds to show the operation before returning to Blackout mode.

Supplement

See page 32 for supplementary information.