Alpine TMI-M990 Benutzerhandbuch

Before deciding on the mounting location,
check that opening and closing the display will
not hamper gear shifting in that position.

• Install at an angle of within 30 degrees from

the horizontal.

Slide the mounting sleeve into the
dashboard. Install the supplied bracket
on the monitor.

• Make sure to use the supplied screw

(M4 x 3) to install the monitor.
If you use another screw to install the
monitor, it may cause a malfunction.

When your vehicle has the Bracket,
mount the long hex bolt onto the rear
panel of the TMI-M990 and put the
Rubber Cap on the hex bolt. If your
vehicle does not have the Mounting
Support, reinforce the monitor unit with
the metal mounting strap (not supplied).
Secure the ground lead of the unit to a
clean metal spot using a screw (

★)

already attached to the vehicle's
chassis.

• For the screw marked 

★★, use an

appropriate screw for the chosen
mounting location.

Continued