Sony bravia 2-691-651-13(2) Benutzerhandbuch

 GB

Pull out the lamp.
For KS-60R200A/50R200A, place your 
index finger through the hoop of the lamp 
handle and pull it upwards, while placing 
your thumb on the dent on the top. Then 
pull the lamp out.
For KS-70R200A, hold the indents on the 
top and bottom of the lamp, and pull the 
lamp straight out.

• The lamp is very hot after use. Never touch the glass 

portion of the lamp or the non-designated surrounding 
parts.

• After the used lamp has cooled, place it into the empty 

box of the replacement lamp. Never put the used lamp 
into a plastic bag.

Place the new lamp halfway in. (For 
KS-60R200A/50R200A)
Follow the gutter in the housing to mount 
the new lamp securely.

Put the new lamp into its place.
For KS-60R200A/50R200A, slide it in 
slowly by pressing the PUSH part of the 
front corners of the lamp until it stops with 
a firm clicking sound to lock.
For KS-70R200A, make sure the lamp is 
securely mounted into the compartment.

• The lamp compartment is tilted.
• To ensure the lamp is securely installed, press the area 

marked PUSH before closing the lamp cover.

• If the lamp is not securely reattached, the self-

diagnostic function may be triggered and 

1

 flashes in 

red three times (page 14).

Hold this part of the lamp

Hold this part of the lamp

PUSH

PUSH