Sony CDP-CE415 Benutzerhandbuch

18

1

Select the play mode you want on each player.

2

When you select No-Delay Play
Press NO DELAY.
“NO DELAY” appears in the display.
When you select X-Fade Play
Press X-FADE.
“X-FADE” appears in the display.
Each time you press the X-FADE button, the
indication appears as follows:

 n FULL n 30 s n 60 s n 90 s n OFF

To change the current player each time a whole
track is finished, select “FULL.”
To change the current player at the specified
interval, press X-FADE repeatedly until the
interval you want appears in the display.

3

Press · to start playing.
The MEGA CONTROL button lights up while the
track in the second player is selected.

Press the corresponding button repeatedly until “NO DELAY”
or “X-FADE” disappears from the display. The current player
continues playing.

Press the corresponding button (NO DELAY or X-FADE)
following the procedure in Step 2 above.

• The play starts from the second player if you start play

while the MEGA CONTROL button is lit.

• When one player has played all the discs/tracks in the

player ahead of the other player, the play stops.

• Do not use the controls on the second player during No-

Delay/X-Fade Play. They may not work correctly.

·

Pause

Stop play

Locate a disc while
the second player is
set to Continuous
Play mode

Locate a track

Press P

Press p

Turn ≠ 

AMS

(DISC)

 ± until the

display shows the disc number
you want, then push

≠ 

AMS

(DISC)

 ±

Press 0 (–AMS+) ) until the

display shows the track number
you want

• To do other operations, use the controls on the second

player or the supplied remote.

• The AMS buttons (=/+) and search buttons

(0/)) on the remote operate the second player as
indicated on the remote.

Set CD 1/2/3 on the remote to CD 3 which is the same
position as the COMMAND MODE selector on the rear panel
of the second player.

Press MEGA CONTROL. The MEGA CONTROL button goes
off and you can control this player.

• You cannot locate a particular point in a track of the second

player using the controls on this player.

• Some controls on this player work on the second player

differently from they do to this player.

When you connect the second player, you can play
tracks in this player and those in the second player
alternately in any play mode (see “Connecting Another
CD Player” on pages 6 and 7).
Select one of the following methods:

• No-Delay Play: The current player changes at each

track. Each time the current player changes to the
other player, the other player starts play without a
break in sound immediately after the current player
ends play. The other player skips the lead-in portion
and starts playing from where the sound actually
begins.

• X-Fade Play: The current player changes at each

track or at the specified interval. You can select the
interval among 30, 60 and 90 seconds. Each time the
current player changes to the other player, the sound
from both players is mixed. The current player ends
play by fading out, and the other player starts play
by fading in.