Sony CDX-GT300EE Benutzerhandbuch

Seite von 36
15
Specifications
CD Player section
Signal-to-noise ratio: 120 dB
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit
Tuner section
FM
Tuning range:
FM1/FM2: 87.5 – 108.0 MHz (at 50 kHz step)
FM3: 65 – 74 MHz (at 30 kHz step)
Aerial terminal: External aerial connector
Intermediate frequency: 10.7 MHz/450 kHz
Usable sensitivity: 9 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)
Harmonic distortion at 1 kHz: 0.5 % (stereo),
0.3 % (mono)
Separation: 35 dB at 1 kHz
Frequency response: 30 – 15,000 Hz
AM
Tuning range: 
531 – 1,602 kHz
Aerial terminal: External aerial connector
Intermediate frequency: 10.7 MHz/450 kHz
Sensitivity: 30 µV
Power amplifier section
Outputs: Speaker outputs (sure seal connectors)
Speaker impedance: 4 – 8 ohms
Maximum power output: 50 W 
× 4 (at 4 ohms)
General
Outputs: 
Audio outputs terminal (front, sub/rear switchable)
Power aerial relay control terminal
Power amplifier control terminal
Inputs: 
Telephone ATT control terminal
Illumination control terminal
BUS control input terminal
BUS audio input terminal
Remote controller input terminal
Aerial input terminal
AUX input jack
 (stereo mini jack)
Tone controls: 
Low: ±10 dB at 60 Hz (XPLOD)
Mid: ±10 dB at 1 kHz (XPLOD)
High: ±10 dB at 10 kHz (XPLOD)
Power requirements: 12 V DC car battery 
(negative earth)
Dimensions: Approx. 178 
× 50 × 181 mm (w/h/d)
Mounting dimensions: 
Approx. 182 
× 53 × 162 mm (w/h/d)
Mass: Approx. 1.2 kg
Supplied accessories: 
Card remote commander: RM-X151
Parts for installation and connections (1 set)
Optional accessories/equipment: 
Rotary commander: RM-X4S
BUS cable (supplied with an RCA pin cord): 
RC-61 (1 m), RC-62 (2 m)
CD changer (10 discs): CDX-757MX
MD changer (6 discs): MDX-66XLP
Source selector: XA-C30
AUX-IN selector: XA-300
Your dealer may not handle some of the above 
listed accessories. Please ask the dealer for 
detailed information.
Note
This unit cannot be connected to a digital preamplifier 
or an equalizer which is Sony BUS system compatible.
Design and specifications are subject to change 
without notice.
US and foreign patents licensed from Dolby 
Laboratories.
MPEG Layer-3 audio coding technology and 
patents licensed from Fraunhofer IIS and 
Thomson.
•  Lead-free solder is used for soldering certain parts.
  (more than 80 %)
•  Halogenated flame retardants are not used in the 
  certain printed wiring boards.
•  Halogenated flame retardants are not used in 
 cabinets.
•  VOC (Volatile Organic Compound)-free vegetable 
  oil based ink is used for printing the carton.
•  Packaging cushions do not use polystyrene foam.